3 Steps To Take After a Crawl Space Floods
Here are Three Steps to Dry a Crawl Space
A structure with a crawlspace may experience flooding after heavy rain or when a body of water overflows. A home located in a flood zone in Lantern Village, CA, may be at risk of repeated crawl space flooding. Here are three steps to dry a crawl space after a home flood and prevent mold from forming.
1. Pump Out Standing Water
Portable sump pumps are effective at removing standing water from a flooded crawl space. A restoration company that specializes in storm damage can supply the right equipment to eliminate every trace of water from a crawl space, including areas that are hard to reach.
2. Dry the Crawl Space
After standing water has been removed, it is necessary to dry a crawl space after a home flood. Dehumidifiers and ventilation solutions such as fans are both effective options for promoting drying. If mold is already a factor, a negative air setup may be necessary to prevent contaminated air and moisture from moving upward into the occupied portion of a residence, particularly when relying on heat to accelerate drying.
3. Consider Waterproofing
A crawl space of a house located on a floodplain could benefit from waterproofing. The grade of the bottom of a crawl space may need to be adjusted to promote water flow and flood vents should be installed to allow water to pass through. A drainage system and adjustments to insulation and sealing are necessary for this approach to minimize major water damage without raising risks of mold or structural damage.
If flooding is occasional, extracting standing water and drying damage after each home flood may be more cost-effective than waterproofing. Repeated flooding can increase the risk of major damage. Waterproofing a crawl space can be the most effective way to minimize risk and the cost of storm damage restoration at a flood-prone residence in Lantern Village, CA.